![]() If you want your system to have a clean look, it may behoove you to get an enclosure that not just fits your Pi, but your drives as well. If you want a cleaner setup, you can use an internal drive designed for network attached storage, but that would require a big enough case. ![]() ![]() However, since the Pi may not be able to supply enough power to all your drives, you may need one that plugs into the wall separately or a powered USB hub. A standard external drive will do the trick in most cases. You will need some drives to fill up with your movies, music, or other files you want to share among devices. Unless you are sharing just a few files, your microSD card probably isn't enough storage for a NAS. Any of the recent-model Pis should work for this project, and you can buy kits with (almost) everything included.įor more information about the other accessories you need for this project, you can check out our guide to getting started with the Raspberry Pi. Obviously, you need a Raspberry Pi for this project, but you also need a power supply, microSD card, a mouse and keyboard, and a monitor for the initial setup. Here's what you need: A Raspberry Pi (with all the trimmings) While many of its approved retailers are sold out, you can still find it on Amazon. ![]() Note that the Raspberry Pi Foundation's last major board release was the Raspberry Pi 4 in 2019. What You Need to Buyīefore You can get started, there are a few things you will need to build your own NAS device. Then, once hooked, you can upgrade to a purpose-made Synology or QNAP model that fits your long-term needs. However, it's a great project if you have a Pi lying around and want to see what NAS life is all about. So if you do use as Raspberry Pi for data storage, you want to make sure that any important information on your Pi-based NAS is also backed up elsewhere. It isn't as rock-solid as, say, a Synology NAS unit, and RAID doesn't work particularly well on the Pi if you want data redundancy. Its price and versatility mean that it can act as a cheap trial NAS that-once you grow out of it-can be repurposed for something else. We have used it to build a retro gaming console, a VPN server, and voice assistant, among other projects. Then there's the Raspberry Pi, a low-cost, Linux-based computer board that can be used for various purposes. But they can get expensive, and if you aren't sure whether a NAS is for you, it's hard to justify the investment-especially if you want something that can grow with your storage needs. Just buy one, pop in a disc drive, and you're off to the races. There are plenty of ready-built NAS devices out there, from companies such as Synology, QNAP, and Asustor. Once you start using one, it's hard to go back. Sure, you could do all this with your main PC, but a NAS is lower-power, and it is designed to run day and night, even if your desktop is out of commission. With a NAS on your network, you can use it to store movies for your Kodi box, save backups from your PC, or use it as a BitTorrent box that seeds your files 24/7. Network attached storage allows you to share files from one, always-on device throughout your house. ![]() What is Netwrok Attached Storage? Asustor Lockerstor 2 Gen2 (AS6702T) ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |